Skip to content

ZWO Cameras 10% Off!

Dew Not Dual Channel Dew Controller with Microprocessor - DNC02

SKU: DEW-DNC02

The Dew-Not new Dual Channel Controller. The NEW DNC02 controller is a dual channel controller based on a microprocessor control system. Each channel controls two outputs for a total of four outputs. Each channel is capable of a duty cycle from 0% on time (effectively off) to 100% on time at the high setting.

Features

  • Microprocessor based dual channel controller

  • UL 94V0 enclosure

  • Zero to 100% output control per channel.

  • Two outputs per channel (may be increased using DNS splitter, sold separately)

  • 10 amp capacity

  • 6 foot power cord fused @ 10 amps

  • Virtually RFI free

  • Two stage low battery indicator:
    • If voltage drops to 11 volts the power led begins slow blinking as a low voltage warning.

    • If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. When the voltage recovers to over 12 volts it will start operating again

  • If voltage drops to 11 volts the power led begins slow blinking as a low voltage warning.

  • If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. When the voltage recovers to over 12 volts it will start operating again

  • The 10.5 volt threshold is to prevent permanent damage to battery packs.

  • Operating voltage is 12 volts.

  • Velcro provided for attachment