Skip to content

It's Here! Our Annual NEAF Demo Sale Is Going On Now - Save Up To 40%!

High Point 10" f/4 Imaging Newtonian OTA - 10F4N - Used - SOLD

SKU: UEQ-0000-HPS-10F4N
$599.00 $390.00
Price match Guarantee

  • This High Point 10" f/4 Imaging Newtonian OTA is Used and in Excellent Condition. Upon inspection, we found that the OTA is fully functional.
  • Image shows new product.
  • Comes with High Point 90-Day Warranty

High Point 10" f/4 Imaging Newtonian OTA

This large aperture reflecting telescope is a great choice for deep-sky, wide field imaging, especially with the addition of the optional High Point Coma Corrector! The fast 10" f/4 Newtonian optical tube assembly has diffraction-limited optics, a built-in cooling fan, and an extended OTA in front of the focuser that increases contrast by keeping stray light from hitting the optics. The sturdy 3.3" Crayford focuser has linear bearings that result in a rigid draw tube and virtually no flexure. You can easily attach a 35mm DSLR camera, webcam, or CCD/CMOS imaging camera and be confident in the mechanical build of the High Point 10" f/4 Newtonian.

The rolled steel OTA is 38.5" long, has a diameter of 11-7/8", and weighs 29.25 pounds without the finder installed. The interior of the tube is painted flat black to reduce reflections. The center-spotted parabolic primary mirror is guaranteed to be diffraction-limited, and is housed in an aluminum cell that is fitted with six "push/pull" collimation knobs for easy collimation without tools. The secondary mirror vanes (there are four of them) are as thin as possible while maintaining stability.

A pair of felt-lined split tube rings and a Vixen-style mounting plate are included with the OTA. If you will be attaching this optical tube assembly to heavy-duty mount, you may require the larger Losmandy-style dovetail, which is sold separately. Keep in mind that the High Point 10" f/4 OTA weighs just about 30 pounds, and will require a mount that can handle a pretty substantial payload. A good option would be the Celestron CGE Pro or CGX, the Losmandy G11, the Paramount, or the Meade LX850. The High Point 10" Newtonian also has a dovetailed finder adapter attached, and accepts the included 50mm finderscope bracket. An 8x50 straight-through optical finderscope slides easily into this bracket.

Sometimes it seems to take forever for your telescope to cool to ambient temperature. The High Point 10" f/4 Imaging Newtonian has a built-in cooling fan will help get you imaging faster! This low-vibration fan is mounted on the primary mirror cell and is powered by a battery pack that holds eight (8) AA batteries (batteries not included).

The High Point 10" f/4 Reflector OTA comes with a heavy-duty 3.3" linear-bearing Crayford Focuser, which is very different from standard Crayford focusers found on most reflectors. There is less wear on the focuser draw-tube, less flexure, and more rigidity due to design differences that support the drive rail and draw-tube along the length of travel instead of at a few contact points. This 3.3" linear bearing focuser also sports dual-speed 1:10 focus, a tension lock knob, and a focus lock knob so that your focus point stays put while imaging. The draw tube has 2" of travel, and has a focusing scale marked on the top to help you come back to the same focus point again and again. A 3.3" to 2" and 2" to 1.25" compression ring adapter are included as standard equipment.