Skip to content

Telescope Accessories & Parts

Items 1 - 25 of 64

Bob's Knobs Meade 12" Lightbridge Low Profile AZ Lock 5/16" - MLB12AZ1

SKU: BOB-MLB12AZ1
  • This lock from Bob's Knobs are meant to work with Meade 12" LightBridge Low Profile AZ Lock.
  • Bob's Knobs lock works with the low-profile design of the Meade 12" LightBridge rocker box.
  • This knob is make od black plastic with stainless steel threads.
  • The lock bolt diameter is 5/16".
$9.95
 

Bob's Knobs Meade 12" Lightbridge Low Profile AZ Lock 3/8" - MLB12AZ2

SKU: BOB-MLB12AZ2
  • This lock from Bob's Knobs are meant to work with Meade 12" LightBridge Low Profile AZ Lock.
  • Bob's Knobs lock works with the low-profile design of the Meade 12" LightBridge rocker box.
  • This knob is make od black plastic with stainless steel threads.
  • The lock bolt diameter is 3/18".
$9.95 $7.96
 
ADM CGEM Super Knob Upgrade Kit - Orange Anodized

ADM 14-Piece CGEM Mount Upgrade Kit - Orange Anodized - CGEM-OR-S

SKU: ADM-CGEM-OR-S
  • This ADM 14-Piece Upgrade Kit is made to work with the Celestron CGEM.
  • Included in the kit are two saddle knobs, two azimuth knobs, two spreader bar knobs, one altitude knob, one finder hole plug, one "T"-handle, the three rosette knobs, and clutch lever knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
Free shipping Free shipping
$230.00
 

Bob's Knobs Springs for Meade 8", 10" & 12" Lightbridge - CNSPR

SKU: BOB-CNSPR
  • These springs from Bob's Knobs are meant to work with Meade 8", 10" & 12" Lightbridge telescopes.
  • Bob's Knobs Meade Lightbridge springs are meant to help provide adequate support to maintain primary mirror collimation.
  • Included in the kit are three metal springs.
  • Bob's Knobs are designed to be stronger than the standard springs.
$16.95
 
Losmandy Clutch Knobs

Losmandy Clutch Knobs for GM-8, G-9, and G-11 Mounts - CKS

SKU: LOS-CKS
  • These Losmandy knobs are made for GM-8, G-9, and G-11 mounts.
  • Losmandy has designed these knobs to replace the standard right ascension and declination clutch collar knobs.
  • With the larger size, these knobs are easier to operate at night and with gloves.
  • The clutch knobs project out of the collar at a 30-degree angle.
$125.00
 
$179.99
 

Tele Vue Eyepiece Caddy Set - TEC-1018

SKU: TLV-TEC-1018
  • This TeleVue Eyepiece Caddy Set contains five total receptacles for three 1.25” eyepieces and two 2” eyepieces.
  • Attaches to the yoke arms featured on all Tele Vue mounts using thumb screws.
  • Removable 1.25" inserts allow this Eyepiece Caddy to accept up to five 1.25" eyepieces.
  • A handy accessory for the Tele Vue Tele-Pod which does not have a place to hold eyepieces.
  • Bracket consists of 3/8" thick aluminum with powder coating for durable construction.
$64.95
 
Software Bisque Precision Bubble Level for Paramount ME Mount

Software Bisque Precision Bubble Level for Paramount ME - LEVELME

SKU: SWB-LEVELME
  • With this Software Bisque Precision Bubble Level, you can be sure that your advanced Paramount ME equatorial mount is being operated from a level position.
  • Provides accuracy to approximately 1 arcminute.
  • Promotes quick leveling and includes all necessary installation tools.
  • Does not work with the Paramount ME II mount.
$70.00
 

Tele Vue Mount Handle Assembly - HAN-1000

SKU: TLV-HAN-1000
  • This is the same TeleVue Mount Handle Assembly that is included with TelePod and Panoramic mounts as standard equipment.
  • Provides better control of movement in both axes of motion for Tele Vue mounts.
  • Attaches to the bottom of TeleVue Mount cradles using pre-drilled holes.
  • Includes a drilling template to make this Mount Handle suitable for use with older model mounts.
$49.95
 
iOptron IEQ45 AZ Base

iOptron IEQ45 AZ Base - 8050

SKU: IOP-8050
  • This iOptron AZ Base converts the iEQ45 from an equatorial mount to an alt-azimuth mount.
  • Attaches to an iEQ45 tripod or pier.
  • Compatible with later versions of the iEQ45 that do not come with an 8406 hand controller.
  • Works with 8000D/DP, 8000AZ, and 8000E iEQ45 models only.
$158.00
 
Orion Three-Fan Cooling System for Convex-Back Dobsonians

Orion Three-Fan Cooling System for Convex-Back Dobsonians - 07818

SKU: ORI-07818
  • This Orion Three-Fan Cooling System minimizes the amount of time spent waiting for your large GoTo Dobsonian telescope to achieve thermal equilibrium.
  • Made specifically to fit the primary mirror cells of the Orion XX14i IntelliScope as well as the XX14g and XX16g GoTo Dobsonian.
  • Enables a quickly optimized visual experience.
  • All three fans feature 33.4 CFM (cubic foot per minute) air flow for considerably accelerated optical cooling for Dobsonian telescopes.
  • These fans are quiet and do not produce vibrations.
$64.99
 

Stellarvue Mount Handle for M1, M2, M2D & M150 - MH002

SKU: STV-MH002
  • Compatible with Stellarvue M1, M2, M2D, and M150 mounts, the Stellarvue MH2 Mount Handle makes telescope transport easier while keeping pressure from being put on the focuser.
  • Attaches to both the TD65 Vixen-style and TD7 Losmandy-style dovetail shoes.
  • Made of 6061-T6 aluminum, the Stellarvue MH2 Mound Handle provides a cushioned grip for additonal comfort.
  • Not suitable for use with the Stellarvue M1V Mount without custom machining.
$39.00
 

Sky-Watcher Star Adventurer Dec Bracket - S20560

SKU: SKY-S20560
  • Use this SkyWatcher Dec Bracket to mount a lightweight telescope on the Star Adventurer Multi-Function Mount.
  • Clutch knob enables adjustments to rotation tightness, while a fine-tuning knob adjusts your camera or telescope's orientation.
  • A removable 1/4” mounting element allows two ball heads to be mounted to the dovetail for dual camera or one scope, one camera setup.
  • One end of the dovetail contains a threaded hole for accepting a separately available counterweight kit.
$40.00
 
Losmandy One Piece Worm Block for GM8 - Without Worm

Losmandy One Piece Worm Block for GM8 - Without Worm - OPW-8

SKU: LOS-OPW-8
  • Losmandy One Piece Worm Block designed for the Losmandy GM8 equatorial mount.
  • The bearing block is made of stainless steel, while the housing features 7075 aluminum construction.
  • Boasts an all in-line motor/gearbox worm configuration.
  • Contains bearings that have been preloaded, along with a screw adjust worm gear mesh.
  • Worm not included.
Free shipping Free shipping
$175.00
 
Losmandy One Piece Worm Block for G-11 - Without Worm - OPW-11

Losmandy One Piece Worm Block for G-11 - Without Worm - OPW-11

SKU: LOS-OPW-11
  • Losmandy One Piece Worm Block designed for the Losmandy G-11 equatorial mount.
  • The bearing block is made of stainless steel, while the housing features 7075 aluminum construction.
  • Boasts an all in-line motor/gearbox worm configuration.
  • Contains bearings that have been preloaded, along with a screw adjust worm gear mesh.
  • Includes High Precision Worm.
$175.00
 
ADM Saddle Plate Knobs for Celestron Advanced VX Mount

ADM Accessories Celestron Advanced VX Saddle Plate Replacement Knobs - VX-SAD

SKU: ADM-VX-SAD
  • This ADM Replacement Knobs are made to work with the Celestron Advanced VX Saddle Plate.
  • Included two saddle knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the replacement knobs orange, so they match the signature Celestron orange color.
$35.00
 
ADM Celestron CGEM Knob Upgrade Kit - Orange Anodized

ADM Accessories CGEM Knob Upgrade Kit - Orange Anodized - CGEM-OR

SKU: ADM-CGEM-OR
  • This ADM Knob Upgrade kit is made to work with the Celestron CGEM.
  • Included in this kit are two saddle knobs, two azimuth knobs, two spreader bar knobs, an altitude knob, a finder hole plug, and a "T" handle.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$145.00
 
ADM Orange Celestron CGEM Saddle Tightening Knobs

ADM Accessories CGEM Knob Upgrade - Two Orange Anodized Rosette Saddle Knobs - CGEM-SAD-OR

SKU: ADM-CGEM-SAD-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included are two Rosette Saddle Knobs.
  • The knobs both measure 2" round and 1.5" long.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$35.00
 
ADM Accessories Orange Altitude Knob for Celestron CGEM

ADM CGEM Knob Upgrade - Orange Anodized Altitude Knob - CGEM-ALT-OR

SKU: ADM-CGEM-ALT-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included is one altitude adjustment knob.
  • The knob are CNC machined from aluminum.
  • ADM has anodized the knob orange, so they match the signature Celestron orange color.
$40.00 $32.00
 
ADM Accessories Orange Anodized Azimuth Knobs for Celestron CGEM

ADM Accessories CGEM Knob Upgrade - Two Orange Anodized Azimuth Knobs - CGEM-AZ-OR

SKU: ADM-CGEM-AZ-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included are two large azimuth knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$35.00
 
ADM Celestron CGEM Polar Hole Plug - Orange

ADM Accessories CGEM Knob Upgrade - Orange Anodized Polar Hole Plug - CGEM-PL-OR

SKU: ADM-CGEM-PL-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included is one Polar hole plug.
  • Theplug are CNC machined from aluminum.
  • ADM has anodized the plug orange, so it matches the signature Celestron orange color.
$10.00
 
ADM Orange Anodized Spreader Bar Knob Upgrade for Celestron CGEM

ADM Accessories CGEM Knob Upgrade - Two Orange Anodized Spreader Bar Knobs - CGEM-SB-OR

SKU: ADM-CGEM-SB-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included are two 2" round rosette spreader bar knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$35.00
 
ADM Replacement CGEM Altitude Locking "T" Knob - Orange

ADM Accessories CGEM Knob Upgrade - Orange Altitude Locking "T" Knob - CGEM-T-OR

SKU: ADM-CGEM-T-OR
  • This ADM Knob Upgrade is made to work with the Celestron CGEM.
  • Included is one altitude locking "T" knob.
  • The knob are CNC machined from aluminum.
  • ADM has anodized the knob orange, so it matches the signature Celestron orange color.
$15.00
 
ADM Accessories CGEM Clutch Levers - Orange Anodized

ADM Accessories CGEM Knob Upgrade - Two Orange Anodized Extra Long Clutch Levers - CGEM-CL-OR

SKU: ADM-CGEM-CL-OR
  • This ADM Knob Upgrade Kit is made to work with the Celestron CGEM.
  • Included are two Clutch Lever Knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$50.00 $40.00
 
ADM Knob Upgrade Kit for Celestron AVX Mount

ADM Knob Upgrade Kit for Celestron Advanced VX Mount - VX-OR

SKU: ADM-VX-OR
  • This ADM Knob Upgrade Kit is made to work with the Celestron Advanced VX Mount.
  • Included in the kit are two azimuth adjustment knobs, two spreader bar knobs, two clutch levers, one polar scope plug, one polar scope cover, and three tripod knobs.
  • The knobs are CNC machined from aluminum.
  • ADM has anodized the knobs orange, so they match the signature Celestron orange color.
$175.00