iOptron CEM70 NUC Ready Center-Balanced Equatorial Mount with Hard Case - No Tripod

iOptron CEM70 NUC Ready Center-Balanced Equatorial Mount

This version of the CEM70 comes NUC ready! The iOptron NUC series mounts work seamlessly with the Intel NUC mini computers (not included), the model must have a thickness of 38 mm. This iOptron mount comes with a bracket positioned on the lower front area of the saddle that holds the mini computer in place. Additionally, the mount is equipped with mount control connections, LAN and USB, as well as 19v (optional 12V) located conveniently to the NUC bracket.

This medium-payload computerized equatorial mount can handle up to a 70 lb. payload, but is still portable enough (the CEM70 weighs just 30 lb. without counterweights) to take to dark-sky observing sites or set up in your back yard. An optional LiteRoc tripod is available for the iOptron CEM70, or you can mount it on the pier of your choice. The mount itself comes in a hard case to provide safe storage at your home or on the road.

iOptron took great care to make sure the CEM70 has very precise pointing and tracking. It comes with 151 mm RA and Dec worm wheels with 248 teeth each, a 21.2 mm worm, and a 1.8-degree stepper motor with 128 micro-step capacity. Tracking accuracy is <+/-3.5 arc seconds.

The iOptron CEM70 comes with the Go2Nova 8407+ hand controller that sports a HUGE database of over 200,000 objects! It also comes with an internal iPolar electronic polar scope for super easy polar alignment and an advanced cable management system to keep everything tidy without hang-ups. There are two DC12V (3A) ports, three USB2.0 ports, one DC in and one DC out, & one iPort.

Other cool features of the CEM70 mount include Park & Zero position, Meridian flip, GPS, and as mentioned above, a hard case! If you have looked at case prices recently, you'll know that this saves you lots of money! Remember, the tripod is optional, even though images may show the mount sitting on one!

iOptron CEM70 Specifications

• Mount Type: Center Balanced Equatorial Mount, or CEM

• Weight Capacity w/o Counterweights: 70 lb.

• Mount Weight: 30 lb.

• Payload/Mount Weight Ratio: 2.33

• Latitude Adjustment Range: 0 - 65 degrees

• Azimuth Adjustment Range: +/-4 degrees

• Tracking Accuracy (PE): <+/-3.5 arcsec

• Period: 348 seconds

• Right Ascension Worm Wheel: 248 teeth M=0.6 diameter 151 mm

• Declination Worm Wheel: 248 teeth M=0.6 diameter 151 mm

• Worm:21.1 mm diameter

• Right Ascension Axle: 55 mm diameter, steel

• Declination Axle: 55 mm diameter, steel

• Right Ascension Bearings: 80 mm diameter

• Declination Bearings: 80 mm diameter

• Counterweight Shaft: 28mm diameter, 415 mm long

• Counterweight: 20 lb.

• Mounting Base Diameter: 152 mm

• Motor: 1.8-degree stepper motor with 128 micro-steps

• Resolution: 0.07 arc seconds

• Transmission: Synchronous belt

• Hand Controller: Go2Nova 8407+ with an 8 line, 21 character LCD screen

• Power: 12V DC, 5A w/2.5mm plug

• Power Consumption: 0.6A tracking, 0.8A during GoTo

• Polar Scope: Internal electronic polar scope (iPolar)

• Meridian Treatment: Stop (0-10-degree pass), flip

• Zero Position: Automatic zero search

• Park Position: horizontal, vertical, current, alt/azi input

• Dovetail Saddle: 8" Losmandy D & Vixen

• Level Indicator: Yes

• Slew Speed: 3.75-degrees per second, 900X max

• PEC: PPEC

• Guiding Port: ST-4

• Communication Port: USB2.0

• GPS: Yes

• Cable Management: 2xDC12V (3A), 3xUSB2.0, 1xDC In/1x DC out, iPort, iX USB input for mount, iPolar & accessories

• Operation Temperature Range: -20 Degrees C to +45 Degrees C

• Hard Case: Yes

• Pier or Tripod: Not Included