Skip to content

UPS Shipping Delays / COVID-19 Response Statement

Takahashi EM200 Temma 2 Equatorial Mount - Mid Latitude - TTM44020


Takahashi EM200 Temma 2Z Equatorial Mount Mid-Latitude

The Takahashi EM-200 Temma 2Z mount is a highly accurate, superbly crafted German equatorial mount suitable for loads up to 35.3 lbs. The mount features the Temma 2Z control system, allowing for PC GOTO functionality as well as precise control using the supplied hand controller.

The Takahashi EM-200 T2Z operates off 12 or 24 VDC and is capable of GOTO operation from a PC or Mac, with a high-speed slew rate of 700X, and slower manual slew rates for R.A. and Dec. adjustments. The mount features a built-in, illuminated polar finder scope for accurate polar alignment, facilitating accurate tracking and GOTO's. To further enhance tracking capability, the mount is auto guider friendly. The mount comes equipped with manual scales for both right ascension and declination, graduated at 10 minutes and 2 degrees, respectively. Two 11 lb counterweights are included.

Please Note : This Takahashi Mount does not come with a tripod.

This EM-200 T2Z ML is suitable for latitudes between 0 and 50 degrees.


  • Type German Equatorial Mount
  • R.A. Slow-Motion Motor driven
  • DEC. Slow-Motion Motor driven
  • Azimuth Adjustment +-15 degrees
  • Elevation 0 to 50 degrees
  • Polar Finder / Accuracy - Built-in / 2 - 4.45 degrees
  • R.A. Setting Circles Accuracy 10 arcminutes
  • DEC. Setting Circles Accuracy 2 degrees
  • Encoders Included
  • Weight (without counterweights) 15 kg

  • Counterweights 2 x 5kg
  • Maximal Loading Capacity 18 kg (without counterweights)
  • Optimal Loading Capacity 15 kg (without counterweights)
  • Operating Voltage 12V / 24V DC - 12v DC only for high speed operation
  • Power Consumption NC
  • Tube Mounting 2 x M8 screws (35 mm)
  • Mounting Capacities Tube rings, plates and dovetail mounting plates,
  • R.A. axis diameter. (material) 40 mm (bronze)
  • R.A. worm gear shaft diameter (material) 18 mm (iron)
  • R.A. gear diameter (material) 92 mm/180 teeth (bronze)
  • DEC. axis diameter (material) 40 mm (iron)
  • DEC. worm gear shaft diameter (material) 18 mm (brass)
  • DEC. gear diameter (material) 92 mm/180 teeth
  • Stepper Motors Accuracy 50 PPS
  • Slow motion speeds 0,1x to 1,9x sidereal rate
  • High speed mode 700x sidereal rate
  • Worm gear shaft cycle 8 minutes
  • Tracking accuracy +- 5"
  • Autoguiding SBIG ST-4/7 compatible