Astronomik OIII 6 nm CCD Filter - 36 mm Round

Astronomik OIII 6 nm CCD Filter - 36 mm

• Made specifically for astrophotography, this Astronomik OIII 6 nm CCD Filter is presented in a 36 mm round cell

• OIII line transmission is nearly 100%

• Close to 6 nm FWHM bandwidth

• Best-suited for planetary nebulae and supernova remnant imaging

• This filter features multi-layer coatings for high resistance to the effects of scratching, aging, and high humidity

• Diffraction limited to sustain the current optical performance level of your telescope

• Made in Germany, a country recognized for producing supreme quality optics!

More About the Astronomik 36 mm OIII 6 nm CCD Filter

Whether imaging under ideally dark conditions, or in a heavily populated area with strong light pollution, for OIII emission line nebulae astrophotography, the Astronomik 6 nm OIII CCD is the optimal filter. Offers complete obstruction of artificial light sources such as mercury and sodium vapor, the principal light pollution culprits, along with natural skyglow and moonshine. This greatly highlights the contrast between OIII line (501 nm) objects and the sky background. With this OIII CCD filter, your imaging potential is significantly improved as greenish and blueish objects can now be photographed.

Using this filter guarantees 88% transmission or more at OIII (501 nm). This filter is made to Astronomik's exacting standards. While transmission ratings may vary between each filter, you are guaranteed a transmission rating greater than 88%, with a typical transmission rating of around 92-95% for the 6 nm OIII. The specific T-Max will be listed on the filter case. You can rest easy knowing that every unit is thoroughly tested and guaranteed to meet Astronomik's stellar benchmark of performance! The result is an exceptionally dark background.

For imaging dim objects in regions of the Milky Way that are heavily crowded with stars, or for viewing in a severely light-polluted environment, the OIII CCD Filter from Astronomik is a fitting selection. The 6 nm FWHM is matched to enable excellent performance with CCD and CMOS sensors with extremely low dark current! The OIII 6 nm CCD also features new MFR coatings, allowing for use with all instruments up to f/4 with no loss in performance.

Like all Astronomik filters, the 31 mm OIII 6 nm CCD Filter is parfocal with all other Astronomik filters. Although its thickness is a minuscule 1 mm, this filter is still highly resistant to potential damage that scratching, aging, and high humidity can inflict. Diffraction is limited to avoid lessening the optical performance of your telescope. Astronomik filters are delivered in a durable plastic storage container of superior quality.