Please use another browser such as Chrome, Edge, Firefox, or Safari for the best experience

Skip to content

iOptron iCam 462C Color Planetary Camera

Free shipping
SKU: IOP-3372
$275.00
 

iOptron iCam 462C Color Camera

Need a camera that is ideal for planetary imaging? The iOptron iCam 462C camera is a highly sensitive color CMOS camera that is perfect for those looking to take beautiful images of the planets and the Moon. In this color camera, iOptron utilizes the Sony IMX462 CMOS sensor. The sensor has a diagonal of 6.5 mm and provides an imaging area of 1/2.8" with a 2.9 µm pixel size and a 2.1 MP resolution (1944 x 1096 pixel array).

This color comes with a unique QE response which allows the sensitivity to reach the peak at 800-850nm. Users can also couple the camera with an IR850 or CH4 filter (filters not included) for infrared imaging.

About the Low Readout Noise

iOptron's iCam cameras have very low readout noise, and according to test results, can be as low as 0.73e at a gain of 350 and around 0.7e at a gain of 400. The HCG mode will automatically turn on when the camera gain setting is >80. This mode greatly reduces the readout noise and retains the same dynamic range since it is at low gain. With the unique DPS (Dead Pixel Suppression) technology that is integrated into all iCam cameras, the 462C camera can eliminate any abnormal/dead pixels by analyzing the camera's dark frames.

Computer Interface

The iOptron 462C Color camera comes with an integrated USB3.0 computer interface. Once connected to a computer and the full-resolution preview enabled, the iCam camera can reach 136 FPS in Raw8 mode (10bit ADC). During sessions of image recording, the recording speed is affected by the hard drive writing speed, so it is recommended that the user utilizes a high-quality solid state drive to record data in order to benefit fully from the USB3.0 data speed.

St-4 Compatibility

All iCam cameras from iOptron are ST-4 compatible. On the body of the camera, users will find the ST-4 port next to the USB port. This compatibility allows users to connect the camera to a mount guide port and enable ST-4 autoguiding.

iCam 462C Camera Technical Features

  • Color or Monochrome: Color
  • Sensor: Sony IMX462 CMOS
  • Sensor Size: 1/2.8" (5.6 x 3.2 mm)
  • Max. Resolution: 1944 x 1096 (2.1 MP)
  • Pixel Size: 2.9 µm
  • Frame Rate: 136fps (@10bit, max. resolution)
  • Shutter: Rolling
  • Exposure Range: 32 µs ~ 2000s
  • Readout Noise: 2.6e ~ 0.7e
  • QE: ~80%
  • Full Well: 12Ke
  • ADC: 12 bit
  • HCG Mode: Supported
  • Optical Window: AR Coated Glass
  • Data Port: USB3.0
  • Guide Port: ST-4 Compatible
  • Telescope Adapter: 1.25"