Please use another browser such as Chrome, Edge, Firefox, or Safari for the best experience

Skip to content Askar FMA135 Sale
Skip to the end of the images gallery
Software Bisque 42 Paramount MEMEIIMXMXMYT Permanent Pier
Skip to the beginning of the images gallery

Software Bisque 42" Paramount ME/MEII/MX/MX+/MYT Permanent Pier

SKU: SWB-SB10525
$1,020.00
 
Ask an Expert
expert photo

Software Bisque 42" ME/MX/MYT Permanent Pier

The Software Bisque Permanent Pier is designed to fit the Paramount ME, MX and MYT mounts and is constructed of two steel plates welded to a 10” diameter steel tube. The entire body is powder-coated on the interior and the exterior to protect the pier from corrosion.

The Software Bisque Permanent Pier Top Plate is also made of .5” steel and is slightly larger in diameter than the base plate (11.850”) to accommodate the Paramount ME base. There are mounting holes drilled in the plate for the ME, MYT and the MX. Please note that the 23.9 cm (9.40-inch) hole pattern for the Paramount ME is symmetric about the center of the pier, so the pier can be mounted at any multiple of 90-degrees for Paramount ME only installations.

The bottom plate of the Paramount Permanent Pier is made of .5” steel. It has an 11” x 11” footprint with 1” radius corners. Each corner has four slotted holes. These holes allow for approximately 10 degrees of rotation for polar azimuth adjustment. You can attach the pier to concrete with four 0.5” J-bolts.

Technical Specifications

  • Column Thickness: 0.13” thick.
  • Height: 42"