Orion Three-Fan Cooling System for Convex-Back Dobsonian Telescopes
Orion has discontinued the Three-Fan Cooling System for Convex-Back Dobsonian Telescopes, and we are out of stock. Here is a link to the Apertura AD Dobsonian Fan and Battery Holder we carry at High Point. If we can be of further assistance, please don't hesitate to call us at 1-800-266-9590 or send an email, and we will be happy to help you. Thank you!
Orion Three-Fan Cooling System for Convex-Back Dobsonian Telescopes
This time-saving cooling system features three fans which have been custom designed to fit the Orion XX14i IntelliScope, XX14g GoTo and XX16g GoTo Dobsonian primary mirror cells. All three small fans work in tandem to help reduce the amount of time needed for the telescope to reach thermal equilibrium with the ambient air temperature of your observing location. You'll enjoy peak performance from your XX14i, XX14g or XX16g GoTo Dobsonian without having to wait as long for the air inside the telescope to cool down to the same temperature as your stargazing site.
When using a reflector, especially a large-aperture Dobsonian such as the XX14i, XX14g or XX16g, it is important to let the telescope's primary mirror equilibrate to ambient temperature. Otherwise, your views will be plagued with wavy disturbances caused by turbulent air currents within the tube. Normally, it can take an hour or more for a large aperture reflector optical tube to reach thermal equilibrium with outdoor temperatures when the telescope is moved outside from a climate-controlled house or even a garage or shed. You can significantly speed up the cooling time using the Orion Three-Fan Cooling System for Convex-Back Dobsonians. Spend more time using your telescope and less time waiting for it to cool down!
Consisting of (3x) 12-volt DC, 0.12A fans which are wired in parallel, the Orion Three-Fan Cooling System for Convex-Back Dobsonians features a single 35" long power cable splitter for convenient use. Each fan boasts 33.4 CFM (cubic foot per minute) air flow to help significantly accelerate cooling of your Dobsonian telescope's optics. The fans operate quietly without vibrating, and they mount easily in threaded holes on the the XX14i, XX14g and XX16g primary mirror cell with included hardware. For best results, run the Orion Three-Fan Cooling System prior to using the reflector telescope. You can also use the cooling fans intermittently between observations to compensate for any ambient temperature changes that may occur. Power is supplied using the included battery holder which accepts 8 D-cell batteries (batteries not included).