Achieving Perfect Focus With A Bahtinov Mask

In astrophotography, one of the most important steps to ensure an amazing photograph of the night sky is to get your telescope in proper focus. There are many ways to do this, however, the easiest method is to use a Bahtinov Mask. Designed in Russia by Pavel Bahtinov, this mask enables you to utilize diffraction spikes (caused by light diffraction around the mask) to get a perfect focus around a star.

How Do I Know if My Telescope Is Out of Focus?

The easiest way to check if your telescope is out of focus is by simply looking at the stars. If you’re using a Newtonian or a Schmidt-Cassegrain, it will immediately be obvious as your stars will look like little “donuts”. The donut shape is caused by the secondary mirror of the telescope. If you own a refractor telescope, it’s a little trickier to determine, but ideally, your stars should be as tiny as possible. If you notice your stars appear a little round and almost look like little planets, your refractor is out of focus. You will also notice that images of the planets will look blurry and have little “ghosts” around them.

62mm vs 75mm Secondary Mirror

Out of focus refractor telescope. The bright star on the upper part of the image is the star Arcturus, which will be the star we use for focusing.

Click to Enlarge Image

How to Get the Right Bahtinov Mask for My Telescope?

Fortunately, there are Bahtinov masks out there that are designed to fit each telescope, from small refractors to large Dobsonians. Simply measure the exterior diameter of your telescope and then choose the Bahtinov mask that has dimensions within that range. Apertura Bright Focus Masks are a fantastic option and have been designed to fit a wide variety of telescopes, from 90mm to 12" in diameter.

Using the Bahtinov Mask

Step 1: Place the Bahtinov mask on the front end of your telescope. Ensure that the Bahtinov mask is secured to the front of the telescope in order to avoid any slippage that could mess up the diffraction pattern on your image.

Step 2: Place either your camera or an eyepiece at the end of the telescope. If you’re using a camera, ensure that it is tightly secured to the end of the telescope, as any slippage of the camera could ruin your image. If you’re using an eyepiece for visual astronomy, note that the focus will not remain the same if you change eyepieces! You will have to refocus again with the Bahtinov mask if you put a new eyepiece in.

Step 3: Point the telescope at a bright star and aim for a rough focus. Do not use the moon! Stars like Sirius, Capella, Rigel, Vega, et cetera, are all great choices to be able to focus. Once you center the star in the middle of your image, take a closer look at the star's diffraction pattern. If you’re using a DSLR or a dedicated astrophotography camera, use the live view to zoom in. If you’re out of focus, your star pattern should look something like this:

Step 4: Turn your focuser so that the center diffraction pattern is aligned exactly between the “><” shaped diffraction pattern. When this is done, your telescope should be perfectly focused.

Step 5: Remove the Bahtinov mask. Once it’s removed, double check your focus. If you see all the stars appear as pinpoints, you’ve achieved focus!


Common Focusing Problems and Other Tips

On some nights, especially cold nights, you might find that throughout your session you’ll see your focus slip by just a hair. This is a huge challenge for many amateur astronomers and it’s the result of your telescope adjusting to temperature. Check on your telescope’s focus every hour or so by repeating the steps above.

For astrophotographers, if you want to achieve a truly perfect focus that’ll stay throughout the night, you’ll want to look into an electronic focuser. These work by connecting your telescope focuser to your computer, which enables software to focus to extremely high precision. This is especially useful if you are imaging a target over multiple nights.

Additionally, telescopes that are “fast” (have a low aperture of around f/2 to f/4) are notoriously difficult to focus for photography. You might find it helpful to connect your camera to software (such as NINA or AstroPhotographyTool) that will judge the center spike’s position to a more accurate degree.

Questions? Contact us!

If you have any questions about finding the right Bahtinov mask, or how to use your Bahtinov mask to achieve perfect focus, our non-commissioned experts here are here to help.

This Article was Last Updated on 02/19/2024

×